3D print Ullevaal Stadion
A free, printable model of the stadium and the roads, houses and larger buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Ullevaal Stadion
Ullevaal Stadion, an all-seater football ground, stands in Oslo, Norway. The Norway national football team plays its home games here, and the Norwegian Cup Final is held at the stadium. The Football Association of Norway fully owns it. It holds approximately 28,000 spectators, and no football stadium in Norway is larger. The Cup finals have been played here since 1948, and it was also the venue for the 1987 and 1997 UEFA Women's Euro finals.
Members of Lyn first suggested a stadium at Ullevaal in 1917, and the company A/S Ullevaal Stadion was set up on January 27, 1925. A running track was part of the original build, so track and field could take place there too, and the capacity was about 35,000 spectators. Crown Prince Olav held the grand opening on September 26, 1926, followed by a friendly in which Lyn beat Örgryte IS of Sweden 5–1. The first international match came on May 29, 1927, a 0–1 loss for Norway against Denmark. The peak attendance of 35,495 dates from 1935, when Norway played Sweden.
The rebuilding began in 1985 with a single-tier West Stand. Two-tier North and East Stands were completed in 1990, and a South Stand followed in 1998. After FIFA changed its rules to require seating for international qualification matches from 1992, the stadium was made all-seater. Removing the running track made it a pure football stadium. Oslo Metro's Ullevål Stadion Station sits next to the stadium.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 8 mm | 1:3,750 |
| 200 mm | 9 mm | 1:3,000 |
| 256 mm | 12 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Roof ribs above the stands
- Fine ribs run across parts of the roof, with tiers of seats visible below. Print friendly adapts them to the print scale; a larger print size or Full detail keeps more of them.
- A thin roof ring
- The roof wraps around the pitch as a wide, thin ring. Layers of 0.12 to 0.16 mm keep its edges clean.
- One piece with the ground
- Ullevaal Stadion is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Ullevaal Stadion takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Ullevaal Stadion is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Ullevaal Stadion STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Ullevaal Stadion grows with the print: about 8 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
