3D print Ibrox Stadium
A free, printable model of Ibrox Stadium, with its four rectangular stands, and the streets and large buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Ibrox Stadium
Ibrox Stadium is a football ground on the River Clyde's south side, in the district of Ibrox in Glasgow, Scotland. It is the home of Rangers, and its all-seated capacity of 51,700 makes it Scotland's third-largest football stadium. Archibald Leitch designed it. Renovations between 1978 and 1981 were designed by The Miller Partnership, and those of 1990 and 1991 by Gareth Hutchison.
The ground opened as Ibrox Park in 1899 and was renamed Ibrox Stadium after renovations were completed in 1997. After a wooden terrace collapsed in 1902, huge earth terraces replaced it, and a main stand followed. On January 2, 1939, a crowd of 118,567 watched a league match against Celtic, a record for any league match in Britain. Another disaster, in 1971, led to the stadium being rebuilt to a large extent, and by 1981 three rectangular, all-seated stands had replaced the bowl-shaped terracing.
The Main Stand opened on January 1, 1929. It has a red-brick facade and a criss-cross balcony in Leitch's style, and it was given Category B listed status in 1987. Ibrox hosted the Scotland national team while Hampden Park underwent redevelopment during the 1990s, along with three Scottish cup finals in that period, and it has staged concerts as well. The 2014 Commonwealth Games rugby sevens competition took place at the stadium.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 11 mm | 1:3,750 |
| 200 mm | 14 mm | 1:3,000 |
| 256 mm | 18 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Lattice truss over one stand
- A long truss of thin bars runs along the roof of one stand. Print friendly adapts the bars to the print scale; Full detail keeps them on a larger print, and 0.12–0.16 mm layers keep them crisp.
- Fine lines on the long facade
- The long stand's facade is covered in narrow vertical and horizontal lines. A bigger print size keeps this detail readable.
- One piece with the ground
- Ibrox Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Ibrox Stadium takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Ibrox Stadium is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Ibrox Stadium STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Ibrox Stadium grows with the print: about 11 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
