3D print Subaru Park
A free, printable model of Subaru Park, a soccer stadium with roofed stands and open lattice trusses, beside the river and a wide road, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Subaru Park
Subaru Park is a stadium built specifically for soccer, standing beside the Commodore Barry Bridge on the Delaware River's waterfront in Chester, Pennsylvania. Philadelphia Union, a Major League Soccer club, play their home games there. Subaru of America sponsors the stadium's naming rights, and in North American competitions it goes by Philadelphia Stadium, owing to advertising rules.
Land and stadium are both owned by Delaware County, whereas the team holds the naming rights under a 30-year lease. The stadium was planned as a first step toward economic development along the waterfront, with further plans for projects such as a river walk, entertainment, retail and housing. The Ardmore-based T.N. Ward Company built it.
The first game there took place on June 27, 2010, with the Union defeating Seattle Sounders FC 3–1. Early drawings showed an oval stadium with a cantilevered roof over all the seating. After consulting the club's supporters, the owners redesigned a dedicated entrance for the group of supporters known as the Sons of Ben. Above the Main and Bridge Stands, cantilevered roofs shield fans without blocking sight of the river or the Commodore Barry Bridge. The Collegiate Rugby Championship was held there every June from 2011 to 2019.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 9 mm | 1:3,750 |
| 200 mm | 11 mm | 1:3,000 |
| 256 mm | 14 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Open lattice roof trusses
- Trusses made of thin bars brace the roofs over the stands. Print friendly adapts the bars to the print scale; Full detail keeps them on a larger print or with a fine nozzle.
- Roofs reaching out over seats
- The roofs project over the seating rows. Printing slowly and at a larger size helps the overhangs, and 0.12–0.16 mm layers keep the edges crisp.
- One piece with the ground
- Subaru Park is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Subaru Park takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Subaru Park is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Subaru Park STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Subaru Park grows with the print: about 9 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
