3D print Everglades National Park
Everglades National Park on one print: a 114 by 116 km relief cut to the park's own border, on a plate that carries its name and facts, with lakes, rivers and land cover in their own colors.
- Region
- Florida
- Established
- 1947
- Area
- About 6,200 km²(2,400 sq mi)
- IUCN category
- V, Protected Landscape/Seascape
- Listed as
- UNESCO World Heritage Site, Ramsar wetland
Seen from above
114 by 116 km, on a 160 mm print
- Taller than life
- The print opens with the Elevation multiplier at 8x so the terrain reads at this size. Set it to 1 for true scale.
- The footprint
- The print follows the park's mapped border from OpenStreetMap, standing on a plate with the park's name and facts along the edges. In the generator you can resize it, change the plate text, or switch to a plain rectangle.
Common questions
Is the Everglades National Park 3D print free?
Yes. The generator runs in your browser and exports a 3MF file you can open in any common slicer. There is no account or payment.
Does the print cover the whole park?
Yes. It opens as the park's own border from OpenStreetMap, 114 by 116 km across, standing on a plate with its name and facts. Switch to a rectangle in the generator to include the land around it.
Is the park printed at its true height?
It starts at 8 times its true height, but the land is so flat that the relief is still only about 0.1 mm on a 160 mm print. The print is mostly the park's shape, its water and its land colors.
Can I get an STL instead of a 3MF?
The generator exports 3MF, which keeps each color as its own part. Any slicer can open it and save an STL if you need one.
Sources: Wikidata: Everglades National Park, OpenStreetMap: Everglades National Park outline, Wikipedia: Everglades National Park, Official website, Mapterhorn elevation data
Nearby
