3D print Canada Life Centre
A free, printable model of Canada Life Centre, a broad-roofed arena with a rounded corner, surrounded by city towers and streets, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Canada Life Centre
Canada Life Centre, an indoor arena for many kinds of events, sits in downtown Winnipeg in Manitoba, Canada. The NHL's Winnipeg Jets, the AHL's Manitoba Moose and the CEBL's Winnipeg Sea Bears all play their home games there. It stands where the Eaton's Winnipeg store once was, and True North Sports & Entertainment owns and operates it. The building measures 41,000 m² (440,000 square feet) and cost C$133.5 million to construct.
The arena opened on November 16, 2004, and took over from the Winnipeg Arena, which had served since 1955. It seats 15,225 for hockey and 16,345 for concerts. Red bricks in the facade recall the Eaton's store that once stood on Portage Avenue, and an original store window, set in its Tyndall stone surround, is displayed in the concourse, holding a collection of Eaton's memorabilia. The Timothy Eaton statue, once a centerpiece of the store, is also kept on the concourse.
During planning and construction it was called the True North Centre. Its first name came from a deal with Manitoba Telecom Services for the naming rights, becoming the MTS Centre. On May 30, 2017, the name changed to Bell MTS Place. In 2021 Winnipeg-based Canada Life Assurance Company bought the naming rights, and the arena became Canada Life Centre. It hosted the 2008 Tim Hortons Brier, and on June 15, 2013, it staged UFC 161, Manitoba's first UFC event.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 7 mm | 1:3,750 |
| 200 mm | 8 mm | 1:3,000 |
| 256 mm | 10 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A low arena with roof details
- The arena is low and broad, with small round fittings scattered across its roof. A bigger print size keeps these details readable; Print friendly adapts them to the print scale, while Full detail keeps them all.
- Vertical lines on the facade
- Narrow vertical fins run along the facade, with a rounded corner at one end. Layers of 0.12–0.16 mm keep the lines crisp.
- One piece with the ground
- Canada Life Centre is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Canada Life Centre takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Canada Life Centre is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Canada Life Centre STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Canada Life Centre grows with the print: about 7 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
