3D print Estadio Monumental David Arellano
A free, printable model of Estadio Monumental David Arellano, an open stadium bowl with four light towers, and the parking, roads and low buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Estadio Monumental David Arellano
Estadio Monumental, a football stadium, stands in Macul, southeast of the center of Santiago, the Chilean capital. Colo-Colo plays its home games here, and other clubs and the national team use it on occasion. The pitch carries the name of David Arellano, who founded Colo-Colo, which is why the whole stadium is sometimes called Estadio Monumental David Arellano.
In 1975 the stadium opened with a double-header watched by 25,599 people, but it proved unsuitable for ongoing use and only five more matches were played there for the time being. It reached its finished form in 1989 and reopened that September against CA Peñarol of Uruguay, with Colo-Colo winning 2-1. The official capacity was then between 62,500 and 65,000, and in 1992, 69,305 spectators saw Colo-Colo play Club Universidad de Chile, the highest attendance recorded.
When the Estadio Nacional, the country's main football stadium, is unavailable, the Chile national team plays here, and the stadium has held seven of its games. In a 1997 qualifier for the France 1998 World Cup, Chile beat Venezuela 6-0, with Ivan Zamorano scoring five goals. Pearl Jam played the stadium on November 16, 2011, and Guns N' Roses performed there with The Who on September 29, 2017.
How it prints
Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 17 mm | 1:4,063 |
| 200 mm | 21 mm | 1:3,250 |
| 256 mm | 27 mm | 1:2,539 |
-
North
-
East
-
South
-
West
- Thin light towers
- Four tall, thin light towers rise above the stands. Print slowly with good cooling, and use Print friendly to adapt thin parts to the print scale; Full detail suits larger prints.
- Fine rows of seating
- The open bowl is lined with many fine rows of seating. Layers of 0.12–0.16 mm keep the rows crisp, and a larger print size keeps them distinct.
- One piece with the ground
- Estadio Monumental David Arellano is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Estadio Monumental David Arellano takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Estadio Monumental David Arellano is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Estadio Monumental David Arellano STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Estadio Monumental David Arellano grows with the print: about 17 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
