3D print La Bombonera
A free, printable model of La Bombonera and the streets and low buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About La Bombonera
La Bombonera, officially Estadio Alberto José Armando, is a football stadium in the La Boca neighborhood of Buenos Aires, Argentina, and the home of Boca Juniors. Its nickname means 'The Chocolate Box', for its resemblance to one, and the official name honors Alberto Armando. Many regard it as one of the best-known stadiums anywhere, for its design, the history of its club and the intense atmosphere. The government of Buenos Aires has declared it a site of public interest, and it also serves as a concert venue.
The Delpini-Sulcic-Bes architectural office won the commission. The old stadium with wooden grandstands on the site was last used on April 10, 1938, and then demolished. Opening day was May 25, 1940, with a friendly between Boca and San Lorenzo that Boca won 2-0. With no lighting system, the match lasted only 70 minutes. The first official game followed on June 2, 1940.
A second tier opened on November 16, 1941, and a third tier and a lighting system were finished in 1953. In 1996 a fourth tier was added, plus a new wing with offices, a museum, VIP boxes and a press area. Murals fill the inside and the outside, and works by the painters Pérez Celis and Rómulo Macció decorate the exterior. The stadium is noted for shaking during matches when fans are in full voice, and from its highest reaches spectators can see the dockyards.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 17 mm | 1:3,750 |
| 200 mm | 21 mm | 1:3,000 |
| 256 mm | 27 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Fins on the curved wall
- Dozens of thin vertical fins run around the curved outer wall. Print friendly adapts them to the print scale; Full detail keeps every one, which suits a larger print or a fine nozzle.
- Grid facade and stepped stands
- One side is a tall flat wall with a fine grid pattern, and the inner stands are layered steps. A bigger print keeps more of the grid, and layers of 0.12 to 0.16 mm keep the steps crisp.
- One piece with the ground
- La Bombonera is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. La Bombonera takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
La Bombonera is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a La Bombonera STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. La Bombonera grows with the print: about 17 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
