3D print Nat Bailey Stadium
A free, printable model of Nat Bailey Stadium, its curved grandstand wrapped around the field, and the park, paths and roads around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Nat Bailey Stadium
Known as The Nat, Rogers Field at Nat Bailey Stadium is a baseball park in Vancouver, British Columbia, and the home field of the Vancouver Canadians, who play in the High-A Northwest League. It is in Hillcrest Park, just north-east of Queen Elizabeth Park, within the Riley Park neighborhood.
The stadium went up in 1951 under the name Capilano Stadium, taking over from Athletic Park, which dated from 1913. In 1978 it was renamed after his death for Vancouver restaurateur Nat Bailey, who founded the White Spot restaurant chain, honoring his work to promote baseball in Vancouver. A naming rights agreement announced in June 2010 made it Scotiabank Field at Nat Bailey Stadium, a name it kept until the deal ended in 2019.
The Vancouver Capilanos were its first tenants, in the early 1950s. Later the Vancouver Mounties, a Triple-A Pacific Coast League club, played there from 1956 until 1962, then 1965 through 1969. When the league came back in 1978, its Vancouver team was the Canadians, and owner Harry Ornest bought most of Sick's Stadium's main assets in Seattle and sent them north to Nat Bailey.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 3 mm | 1:3,750 |
| 200 mm | 4 mm | 1:3,000 |
| 256 mm | 5 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Low, curved grandstand
- The stadium is a low, sweeping curve with rows of seating and thin rails. Print friendly adapts the thin rails to the print scale; Full detail keeps them on larger prints with a fine nozzle.
- Small overall height
- The grandstand is short compared with its footprint, so a larger print size helps the seating rows stay distinct. Layers of 0.12–0.16 mm keep the stepped seating crisp.
- One piece with the ground
- Nat Bailey Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Nat Bailey Stadium takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Nat Bailey Stadium is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Nat Bailey Stadium STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Nat Bailey Stadium grows with the print: about 3 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
