3D print Santiago Bernabéu Stadium
A free, printable model of the Bernabéu stadium and the buildings, roads and green patches around it in Madrid, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Santiago Bernabéu Stadium
The Bernabéu, also called Santiago Bernabéu Stadium, is a football stadium with a retractable roof in Madrid, Spain, in the Chamartín district. It has been Real Madrid's home since it was completed in 1947. After an extensive renovation finished in late 2024, its seating capacity is 83,186. The stadium is named after Santiago Bernabéu (1895–1978), who was a Real Madrid player and later the club's president.
Santiago Bernabéu became Real Madrid's president in September 1943, and the plan for a new stadium gained ambitious momentum under him. In September 1944, after evaluating seven submitted projects, a jury gave first prize to the design by Luis Alemany Soler and Manuel Muñoz Monasterio. Bernabéu symbolically began construction with a groundbreaking strike on October 27, 1944. The work took 30 months, and basic materials were scarce in post-war Spain. The company Huarte y Compañía carried it out from June 1945 under the architects Alemany and Muñoz Monasterio, with civil engineer Carlos Fernández Casado.
The stadium has staged four European Cup and UEFA Champions League finals (1957, 1969, 1980 and 2010). The 2018 Copa Libertadores final also came here for its return leg, so it is the single ground that has staged finals in both competitions. Its pitch also saw the 1982 FIFA World Cup final and the final of the 1964 European Nations' Cup, which makes it the first European stadium to stage a UEFA Euro final as well as a World Cup final.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 20 mm | 1:3,750 |
| 200 mm | 24 mm | 1:3,000 |
| 256 mm | 31 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Fine bands on the outer wall
- The curved outer wall is covered in thin horizontal bands and vertical lines. Layers of 0.12 to 0.16 mm keep them readable, and Print friendly adapts the finest ones to your print scale.
- Wide roof ring
- The roof reaches inward over the seating as a thin ring around an open center. A larger print keeps this ring more distinct, and Full detail preserves its radial lines.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Santiago Bernabéu Stadium takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Santiago Bernabéu Stadium is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Santiago Bernabéu Stadium STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Santiago Bernabéu Stadium grows with the print: about 20 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
