3D print the Torre Cepsa
A free, printable model of Torre Cepsa and the neighboring towers, roads and green patches around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Torre Cepsa
Torre Cepsa is the name a Madrid skyscraper carried between 2014 and 2024. It is in Madrid, Spain, within the Cuatro Torres Business Area, at 248.3 m (815 ft) with 45 floors. Only Torre de Cristal is taller there, by less than a meter. The tower has been called Torre Repsol, Torre Caja Madrid, Torre Bankia and Torre Moeve at other times, depending on which major Spanish company held the lease.
Lord Foster designed it, and it is also colloquially called the Torre Foster. Dragados teamed up with Fomento de Construcciones y Contratas to build it. It began as Torre Repsol, planned as headquarters of the oil and gas company, but Repsol moved its planned headquarters during construction, and Caja Madrid paid €815 million for the building in August 2007. The first cranes went up on October 8, 2004.
In October 2013 the Abu Dhabi fund IPIC, owner of Cepsa, agreed with Bankia that the oil company would occupy the tower as its headquarters. In June 2014 the move of Cepsa's 1,500 employees was announced, and it was completed by August; Cepsa's logo went up at the top of the tower at the end of 2014. In 2016 Amancio Ortega bought the tower for €490 million through Pontegadea Inmobiliaria.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 67 mm | 1:3,750 |
| 200 mm | 83 mm | 1:3,000 |
| 256 mm | 107 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Cross braces and an open top
- The shaft carries thin X-shaped braces, and the crown is an open frame. Print friendly adapts these thin parts to the print scale; Full detail keeps them on a larger print.
- A tall, slim shaft
- The tower is narrow for its height. Print slowly with cooling for the upper floors, and use layers of 0.12 to 0.16 mm for crisp edges.
- One piece with the ground
- The Torre Cepsa is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Torre Cepsa takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Torre Cepsa is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Torre Cepsa STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Torre Cepsa grows with the print: about 67 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
