3D print ScottsMiracle-Gro Field
A free, printable model of ScottsMiracle-Gro Field's canopy roof and stands, with the roads, large low buildings and a bit of water around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About ScottsMiracle-Gro Field
ScottsMiracle-Gro Field is a stadium built specifically for soccer in Columbus, Ohio. Major League Soccer's Columbus Crew play there. Its 2021 opening came under the name Lower.com Field, replacing Historic Crew Stadium, the club's earlier home, which was later turned into the Crew's training center. Building the stadium cost $314 million. It sits in the heart of the Astor Park development, a mixed-use area beside the Arena District and downtown, and it has 1,900 club seats and 30 suites.
Work was meant to start in summer 2019, but delays pushed the groundbreaking to October 10, 2019. The opening match, on July 3, 2021, ended level at 2–2 with the New England Revolution, while parts of the stadium were still being built. Tajon Buchanan of New England scored the first goal in stadium history, and Gyasi Zardes got Columbus' first in that match. The Crew's first win there came on July 17, 2021, by 2–1 over New York City FC.
The naming rights belong to Scotts Miracle-Gro Company of Marysville, Ohio; the agreement was announced on November 25, 2025, and the stadium took the new name that day. During its first five seasons it was called Lower.com Field, after a naming rights deal with Lower.com, an online mortgage lender based in Columbus. That agreement was announced on June 15, 2021, shortly before the opening.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 7 mm | 1:3,750 |
| 200 mm | 9 mm | 1:3,000 |
| 256 mm | 12 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Roof canopy on angled struts
- A broad roof canopy rests on rows of angled struts around the outside. Print friendly adapts these thin parts to your print scale; Full detail keeps each strut, best for a larger print or a fine nozzle.
- Stepped seating rows
- The stands inside the bowl are built from thin, stepped rows. A larger print keeps them readable, and layers of 0.12 to 0.16 mm keep the steps crisp.
- One piece with the ground
- ScottsMiracle-Gro Field is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. ScottsMiracle-Gro Field takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
ScottsMiracle-Gro Field is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a ScottsMiracle-Gro Field STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. ScottsMiracle-Gro Field grows with the print: about 7 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
