A white 3D print of Idrottsparken, a tight rectangular football ground with flat roofs over three sides, an open terrace at the south end and a lattice floodlight mast at each corner, among the surrounding streets and buildings.

3D print Idrottsparken (Norrköping)

A free, printable model of Idrottsparken, with its three flat roofs, open south terrace and corner floodlight masts, and the streets and buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Idrottsparken (Norrköping) model, North view North
  • Idrottsparken (Norrköping) model, East view East
  • Idrottsparken (Norrköping) model, South view South
  • Idrottsparken (Norrköping) model, West view West
On a 160 mm print
12 mm
Scale
1:3,750

12 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Lattice floodlight masts

    Four tall braced masts rise at the corners above the roofs, each on a splayed base with a lamp bank at the top. Full detail keeps the lattice and lamp banks for a large print; Print friendly adapts them on a smaller one.

  2. Open south terrace

    The south end has no roof, just thin barriers, stair flights and a low back wall, against three flat roofed sides. Layers of 0.12 to 0.16 mm keep those small steps crisp.

  3. One piece with the ground

    Idrottsparken (Norrköping) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Idrottsparken (Norrköping) takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Idrottsparken (Norrköping)

Norrköping's Idrottsparken serves several sports, football above all, and IFK Norrköping, IK Sleipner and IF Sylvia all play at home there. The ground opened on September 25, 1903, after work that had begun on April 27, and the opening formed part of a sports festival run by the Norrköping Sports Association. Capacity was 19,414 until the 2008–09 rebuild, which cut it to roughly 16,000 and brought artificial turf.

Some group stage matches of the 1958 FIFA World Cup were played there, and at the Euro 1992 it staged three Group B games: CIS against Germany, Scotland against Germany, and Scotland against CIS. The rebuild added 16 VIP booths, seats for 515 VIP spectators, three bars, two restaurants and an indoor training hall, Teknikhallen.

IFK Norrköping bought the arena from the city council in 2010 for 308.5 million SEK. The names changed over the years: Norrköpings Idrottspark from the opening until the 2009 renovation, then Nya Parken, and Östgötaporten in 2016, once the naming rights went to a real estate company. It has also been called PlatinumCars Arena.

About this model

Idrottsparken (Norrköping) is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Keep exploring

More landmarks to print

All landmarks