3D print Anfield
A free, printable model of Anfield's four roofed stands and the streets of terraced houses, park and open ground around them, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Anfield
Anfield, in the Anfield district of Liverpool, England, is a football ground. Liverpool Football Club has played there since the club was formed in 1892. The ground opened in 1884 and was first home to Everton, who stayed until 1891 and then left for Goodison Park after a dispute with John Houlding, the Anfield owner and club president. That quarrel led Houlding to found Liverpool F.C. The stadium takes its name from the surrounding area.
The four stands are the Main Stand, the Anfield Road End, the Spion Kop and the Sir Kenny Dalglish Stand. Its seating capacity is 61,276, and the record attendance of 61,905 came in a 1952 match against Wolverhampton Wanderers. The Taylor Report led the ground to go all-seater in 1994, reducing capacity. In 1928 a topmast from the SS Great Eastern, an early iron ship, was raised next to the Kop, where it still serves as a flagpole.
Two gates honor Bob Paisley and Bill Shankly, both former Liverpool managers, and statues of both men stand outside the ground. You'll Never Walk Alone is written across the Shankly Gates, which were put up in 1982. The club proposed moving to a new stadium in Stanley Park in 2002, but after Fenway Sports Group bought Liverpool in 2010 it chose to expand Anfield instead. An extension opened on September 9, 2016, and work on the Anfield Road Stand in 2024 lifted capacity to over 61,000.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 12 mm | 1:3,750 |
| 200 mm | 15 mm | 1:3,000 |
| 256 mm | 19 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Thin trusses on the roofs
- Slim truss lines run along the top of the stand roofs. Print friendly adapts these thin parts to your print scale; Full detail keeps them, and layers of 0.12 to 0.16 mm keep them crisp.
- Print larger for facade detail
- The stands are fronted with rows of narrow windows and vertical panels. A larger print keeps more of that detail, since the whole stadium is compact.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Anfield takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Anfield is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Anfield STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Anfield grows with the print: about 12 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
