3D print the Azrieli Sarona Tower
A free, printable model of the Azrieli Sarona Tower on Begin Road, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Azrieli Sarona Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 239 m
- On a 160 mm print
- 66 mm
- Scale
- 1:3,750
239 m of the Azrieli Sarona Tower, 66 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Twin twisting volumes
The model splits into two twisting volumes around a deep seam, with a fine staggered window grid on the faces. Print friendly softens that relief; Full detail or a larger print keeps the pattern crisp.
- Flat crowns and roof wells
Both tops are flat and slightly offset, with open roof wells inside the parapets. These read best at a larger print size, where the wells and thin caps survive.
- One piece with the ground
The Azrieli Sarona Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Azrieli Sarona Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Azrieli Sarona Tower
The Azrieli Sarona Tower stands in Tel Aviv's Sarona district, on Begin Road in Israel. It is a 238.5-meter (782 ft) skyscraper with 61 floors and is Israel's third tallest building. The Azrieli Group bought the plot in May 2011 for 522 million shekels, initially planning a 180-meter office block. In 2013 the district planning committee approved a taller scheme, 255 meters above sea level and 238.5 meters above ground.
A seven-level garage below ground supplies 1,600 parking spaces, while the commercial center fills the first three floors. David Azrieli laid the cornerstone on March 12, 2012, and 60 percent of the space was leased by June 2016. The tower opened in 2017 and is the work of architect Moshe Tzur.
In 2012 the developer won permission to add 3,300 square meters of commercial space. Rather than add an eighth garage level, it set aside 500 parking spaces for public use. In 2015 it leased floors 33 to 37 for 20 years for a hotel.
About this model
The Azrieli Sarona Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
