3D print the Jaffa Clock Tower
A free, printable model of the Jaffa Clock Tower, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Jaffa Clock Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender crown and dials
The tower ends in a steep gabled crown, a tapering spire and a small ball-tipped pole. Print friendly adapts these thin parts; Full detail keeps the clock dials and grille relief for a larger print.
- Layered stone stages
Three stone stages are separated by projecting cornices, with arched windows between them. A larger print and 0.12–0.16 mm layers keep the cornice edges and window reveals crisp.
- One piece with the ground
The Jaffa Clock Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Jaffa Clock Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Jaffa Clock Tower
The Jaffa Clock Tower rises on Yefet Street in Jaffa, at the northern edge of the street and within Tel Aviv. The limestone tower was begun in 1900 on the initiative of Joseph Bey Moyal, a Jewish businessman in Jaffa. Jews, Armenians, Maronites and Arabs all contributed to its construction.
It was raised for the silver jubilee of Ottoman Sultan Abdul Hamid II. The tower was erected by 1903. The new tower also helped the town center grow while Jaffa was modernizing quickly. It belongs to a group of seven clock towers from the Ottoman period in Palestine, the others standing in Safed, Acre, Nazareth, Haifa and Nablus.
Moritz Schoenberg, a clockmaker from Rishon LeZion, made the clock mechanism. The tower was renovated in 1965 or 1966, when new clocks and colorful stained glass windows by Arie Koren were added, and again in 2001, when the original mechanism and bell were found. A plaque commemorates Israelis who died in the 1948 Arab–Israeli War battle for the town.
About this model
The Jaffa Clock Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
