3D print Banner Estrella Medical Center

9 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

1. Small at the default print

   The hospital is a low, wide campus, so it prints small in the default scene. A larger print size helps the courtyard, bridge and entrance read; Print friendly simplifies the thinnest parts.

2. Open courtyard and bridge

   The model keeps an open courtyard with a raised bridge. Full detail preserves the opening and the bridge span; use 0.12–0.16 mm layers for the fins and screens.

3. One piece with the ground

   Banner Estrella Medical Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

4. Pick the detail for your nozzle

   In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

5. Colors

   Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Banner Estrella Medical Center takes the building color.

6. File format

   You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.