3D print Brisbane City Hall
A free, printable model of Brisbane City Hall, with its clock tower, dome and columned facades among streets and taller buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 87 m
- On a 160 mm print
- 26 mm
- Scale
- 1:3,750
87 m of Brisbane City Hall, 26 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Protect the tower details
The clock tower ends in slender columns beneath a small pointed roof. Use Print friendly at smaller sizes to adapt those columns, and print slowly with cooling for the tower's fine upper details.
- Define the dome and columns
The low dome and long rows of facade columns carry closely spaced details. Larger prints preserve their separation, while layers of 0.12–0.16 mm help keep the dome's stepped profile crisp.
- One piece with the ground
Brisbane City Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Brisbane City Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Brisbane City Hall
Brisbane City Hall serves as the municipal council's seat in Brisbane, Queensland, Australia. Its principal entrance faces King George Square, with other entrances on Ann and Adelaide Streets. Hall and Prentice designed the building with Bruce Dellit, Emil Sodersten, Peter Kaad and Noel Wilson. Construction began in 1920, and the official opening took place on April 8, 1930. The formal, symmetrical Italian Renaissance design has three floors above a partial basement, and received Queensland Heritage Register listing in 1992.
The design draws on Rome's Pantheon and the campanile of St Mark's in Venice. The clock tower rises 87.47 meters (287.0 feet) above ground, with Westminster chimes ringing every quarter hour and an observation platform above the clocks. Inside, a circular auditorium accommodates up to 1,600 people beneath a copper dome. The hall has hosted orchestral concerts, royal receptions, graduations and political meetings. Following a restoration lasting three years, it reopened on April 6, 2013; the council chambers and the mayoral offices remain in the building.
About this model
Brisbane City Hall is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
