A white 3D print of the Capitol of Puerto Rico, a domed building with a columned front and low side wings, set among lawns and avenues with the sea beyond.

3D print the Capitol of Puerto Rico

A free, printable model of the Capitol of Puerto Rico with its dome, the avenues and lawns around it, and the sea beyond, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Capitol of Puerto Rico model, North view North
  • Capitol of Puerto Rico model, East view East
  • Capitol of Puerto Rico model, South view South
  • Capitol of Puerto Rico model, West view West

© OpenStreetMap contributors

The model you print

Capitol of Puerto Rico in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
12 mm
Scale
1:3,750

12 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Dome and small lantern

    The dome carries a small lantern on top and a ring of detail around its base. Print friendly adapts these to the print scale; Full detail keeps them for a larger print or a fine nozzle.

  2. Columns across the portico

    The columned front is made of many closely spaced columns. A layer height of 0.12–0.16 mm keeps them crisp, and a bigger print size keeps more of the gaps between them.

  3. One piece with the ground

    The Capitol of Puerto Rico is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Capitol of Puerto Rico takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Capitol of Puerto Rico

El Capitolio, the Capitol of Puerto Rico, houses Puerto Rico's Legislative Assembly, a two-chamber legislature made up of a Senate plus a House of Representatives. It stands on San Juan Islet, within the Puerta de Tierra historic district, just beyond the walls surrounding the Old San Juan historic quarter, on an elevated point overlooking the Atlantic Ocean to the north and San Juan Bay to the south.

The white marble building went up between 1921 and 1929 in the Neoclassical Beaux-Arts style. Architect Rafael Carmoega designed it to resemble the Pantheon in Rome, taking New York City's Low Memorial Library as inspiration. Construction had begun in 1921 on an earlier Renaissance design, but it halted after the first level was finished because of political instability. Work resumed in 1925 under State Architect Carmoega, and the building was formally inaugurated on February 11, 1929.

A combination of three features is described as unique in the world: a dome ceiling decorated with mosaics, an exterior clad in marble, and a main façade that sits beside the Atlantic Ocean and faces it. The Capitol lies approximately 1 mile (1.6 km) from La Fortaleza, the executive branch's seat, and from the Supreme Court Building, home of the judicial branch. In 1977 it joined the National Register of Historic Places in the United States.

About this model

The Capitol of Puerto Rico is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Outside the United States this design may still be protected; check the rules where you sell.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in San Juan

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits