3D print the Dhammayangyi Temple
A free, printable 3D model of the Dhammayangyi Temple and its surrounding area, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Dhammayangyi Temple in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 17 mm
- Scale
- 1:3,750
17 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Broad temple, fine details
A wide temple has many small corners and ledges. A larger print size keeps small details, and Print friendly adapts thin parts if you print small.
- One piece with the ground
The Dhammayangyi Temple is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Dhammayangyi Temple takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Dhammayangyi Temple
The Dhammayangyi Temple is a Buddhist temple in Bagan, Myanmar. It is bigger than every other temple in Bagan and is also the widest, and it is popularly known as the Dhammayan. King Narathu built it during his reign, from 1167 to 1170. Narathu took the throne after assassinating his elder brother as well as his father, Alaungsithu, and he presumably built it to atone for his sins.
Its layout is similar to that of the Ananda Temple. Burmese chronicles state that some Indians assassinated the king while construction was under way, leaving the temple unfinished, while Sinhalese sources indicate that Sinhalese invaders killed him. For reasons unknown, the interior is bricked up, so visitors can enter only the four porches and outer corridors.
About this model
The Dhammayangyi Temple is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
