3D print Estadio Azteca
A free, printable model of Estadio Azteca and the roads and buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Estadio Azteca
Estadio Azteca stands in Coyoacán, Mexico City; for sponsorship reasons it is officially named Estadio Banorte. Its elevation is 2,241 meters (7,352 ft), and it serves as the official home of Club América (Liga MX) and of the Mexico national team. The stadium holds 87,523 people, more than any other stadium in Latin America.
The architects were Rafael Mijares Alcérreca and Pedro Ramírez Vázquez. The stadium was conceived as a major venue under President Adolfo López Mateos, and the 1968 Summer Olympics were awarded to Mexico in 1963. Ground was broken in 1961. The first match, Club América against Torino F.C. on May 29, 1966, finished 2–2, with room for 107,494 spectators. A modern lighting system followed on June 5, 1966, with a night game between Valencia C.F. and Necaxa.
Nicknamed the Temple of Football and the Cathedral of Football, the stadium was the first to stage two FIFA World Cup finals. Brazil won the 1970 final over Italy, 4–1, and Argentina took the 1986 final against West Germany, 3–2. A 1970 semifinal in which Italy won 4–3 in extra time against West Germany, the Game of the Century, was played there too, and the stadium was the main venue for the 1968 Olympic football tournament and for the 1971 Women's World Cup.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 18 mm | 1:3,750 |
| 200 mm | 23 mm | 1:3,000 |
| 256 mm | 29 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Thin ribs across the roof ring
- Many slim ribs run across the ring around the bowl. Print friendly adapts them to the print scale; Full detail keeps every rib on a larger print or with a fine nozzle.
- Slender columns around the base
- A row of slim columns circles the lower stand. A larger print size and 0.12–0.16 mm layers keep these supports crisp.
- One piece with the ground
- Estadio Azteca is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Estadio Azteca takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Estadio Azteca is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Estadio Azteca STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Estadio Azteca grows with the print: about 18 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
