3D print King Abdullah Sports City
A free, printable model of King Abdullah Sports City Stadium, a round stadium with an open lattice wall and ring roof, on flat open ground, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About King Abdullah Sports City
King Abdullah Sports City Stadium is a multi-purpose stadium about 30 km north of downtown Jeddah, Saudi Arabia. It is the main venue within the King Abdullah Sports City complex, which carries the name of Abdullah, the king of Saudi Arabia at the time of the stadium's opening. Football is played in the main stadium, named King Abdullah International Stadium. No stadium in Jeddah is bigger, and it is one of the biggest in Asia, with smaller sports venues around it.
Beyond the main stadium, the complex has three football fields, four small indoor arenas that double as football venues, six tennis courts, plus one large indoor arena that serves sports and other uses. It also has a main mosque, six smaller mosques and a comprehensive media center. Games in the 2023 FIFA Club World Cup were played at the stadium, and WWE staged its Greatest Royal Rumble event there on April 27, 2018.
The contractor was a joint venture of Al Muhaidib Contracting Company and the Belgian construction company BESIX Group. The complex opened on May 1, 2014, with a King's Cup final in which Riyadh's Al-Shabab beat Jeddah's Al-Ahli SC 3–0 in front of 62,241 fans. The pitch is paspalum turfgrass supplied by Atlas Turf International.
How it prints
Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 17 mm | 1:4,063 |
| 200 mm | 21 mm | 1:3,250 |
| 256 mm | 27 mm | 1:2,539 |
-
North
-
East
-
South
-
West
- An open lattice wall
- The outer wall is an open lattice of diagonal braces on thin columns. Print friendly adapts these thin members to the print scale; Full detail keeps them, best on a larger print with 0.12–0.16 mm layers.
- A broad ring roof
- The ring roof projects out over the lattice below it. A larger print size and slower printing help keep its edge clean.
- One piece with the ground
- King Abdullah Sports City is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. King Abdullah Sports City takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
King Abdullah Sports City is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a King Abdullah Sports City STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. King Abdullah Sports City grows with the print: about 17 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
