3D print Lomisa church
A free, printable model of Lomisa church, a small stone hall church with a gabled roof and side annexes, on a grassy mountain slope, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Lomisa church in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A very small model
Lomisa is a small church, so the printed landmark is low. Print at a larger size to give the stone courses and roof ridges enough room to show.
- Stonework and roof ridges
The walls carry many small stone blocks and the roof has fine ridges. Print friendly adapts them at small sizes; Full detail with a 0.12-0.16 mm layer height keeps them crisp.
- One piece with the ground
Lomisa church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Lomisa church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Lomisa church
Lomisa church is a Christian shrine from the Middle Ages in the east of Georgia, and it honors Saint George. The plain stone hall church was raised in either the 9th or the 10th century. At an elevation of roughly 2,200 m (7,218 ft), it sits on a mountain ridge that divides the Ksani and Aragvi valleys. Mtiuleti, a highland province, and neighboring communities treat it as their principal shrine, and Georgia has inscribed it on a register of nationally significant immovable cultural monuments.
The shrine crowns a high mountain pass in Dusheti Municipality, roughly 7 km to the south of Kvemo Mleta village and 18 km to the northwest of Pasanauri, a small town, in a straight line. The hall church measures 14.5 × 7.8 m and is made of undressed stone, and two annexes were added later on its south and north sides. Parts of it lie in ruin, leaving the building partly buried in soil and debris. A vaulted ceiling rests on an arch carried by pilasters, and niches line the long walls. Ruins of other structures surround it, among them the ragged columns of a two-storey bell tower that once stood to the south.
Many local legends and folktales mention Lomisa. Inside, an oakwood door covered in iron carries Georgian inscriptions from the 16th-17th centuries. The church also holds an old, massive iron chain that believers hang around the neck and circle the shrine counterclockwise three times when making a promise or a wish. Each year the Wednesday after Pentecost brings thousands of pilgrims up the mountain for a festival called Lomisoba.
About this model
Lomisa church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





