3D print Midland Square
A free, printable model of Midland Square and the dense blocks of towers and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Midland Square in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 247 m
- On a 160 mm print
- 66 mm
- Scale
- 1:3,750
247 m of Midland Square, 66 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine window banding
The tower shaft is covered in thin horizontal banding for its floors. A larger print and a 0.12–0.16 mm layer height keep these lines crisp; "Print friendly" adapts them to the print scale.
- Rooftop details
The top of the tower has small stepped rooftop volumes. "Full detail" keeps every one of them, which suits large prints or a fine nozzle.
- One piece with the ground
Midland Square is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Midland Square takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Midland Square
Midland Square is a skyscraper in Nagoya, Aichi, Japan, standing in Nakamura-ku's Meieki district. Its official name is the Toyota-Mainichi Building. The tower opened in early 2007 and stands 247 m (810 ft) tall, a little higher than the JR Central Towers close by.
The building holds offices of many companies. Tenants include Mainichi Shimbun, Towa Real Estate and Toyota Motor Corporation. There is also a shopping center of 60 name-brand stores, plus a cinema and two automobile showrooms. Its open-air observation deck holds the record as the highest in Japan.
The elevators are unusual: they have double floors, and they need only 40 seconds to reach the top. The building takes its name from the Chūbu region, whose name means "central region", and Nagoya is the capital of that region.
About this model
Midland Square is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
