3D print Mode Gakuen Spiral Towers
A free, printable model of the tower, with its twisting diagonal lattice skin and open top, standing among the dense surrounding buildings and roads, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Mode Gakuen Spiral Towers in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 170 m
- On a 160 mm print
- 46 mm
- Scale
- 1:3,750
170 m of Mode Gakuen Spiral Towers, 46 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Twisting diagonal lattice
A thin diagonal grid wraps the tower and spirals as it rises. Print friendly adapts this lattice to the print scale; Full detail keeps every bar on a larger print.
- Open top and layer height
The top has thin fins around an open crown. A layer height of 0.12–0.16 mm and a bigger print size keep the lattice and fins crisp, and printing slowly helps the tall, thin parts.
- One piece with the ground
Mode Gakuen Spiral Towers is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Mode Gakuen Spiral Towers takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Mode Gakuen Spiral Towers
Mode Gakuen Spiral Towers, known in Japanese as モード学園スパイラルタワーズ, is an educational facility with 36 stories in Nakamura-ku, part of Nagoya in Aichi, Japan. The building is 170 meters (558 ft) tall, which puts it among the tallest buildings in Nagoya. It is home to three vocational schools.
Those schools are Nagoya Mode Gakuen, Nagoya Isen and HAL Nagoya. The architecture firm Nikken Sekkei designed the building, and Obayashi Corporation was the main building contractor for the project. It opened in 2008, and its recorded area is 48,989 square meters.
About this model
Mode Gakuen Spiral Towers is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
