A white 3D print of the Church and Convent of São Francisco (Salvador), a long gabled church with two bell towers, beside an open square with a green patch, among dense streets of buildings.

3D print the Church and Convent of São Francisco (Salvador)

A free, printable model of the Church and Convent of São Francisco, its two bell towers and the dense streets, square and buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Church and Convent of São Francisco (Salvador) model, North view North
  • Church and Convent of São Francisco (Salvador) model, East view East
  • Church and Convent of São Francisco (Salvador) model, South view South
  • Church and Convent of São Francisco (Salvador) model, West view West

© OpenStreetMap contributors

The model you print

Church and Convent of São Francisco (Salvador) in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
14 mm
Scale
1:3,750

14 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Twin tower tops

    The two bell towers end in small pointed caps, the thinnest parts of the model. Print friendly adapts them to the print scale; print slowly with good cooling.

  2. Small within a big map

    The church is a small part of a large, dense map. A larger print and 0.12–0.16 mm layers keep the façade details readable.

  3. One piece with the ground

    The Church and Convent of São Francisco (Salvador) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Church and Convent of São Francisco (Salvador) takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Church and Convent of São Francisco (Salvador)

The São Francisco Church and Convent sits in Salvador's Historic Center, in the Brazilian state of Bahia, next to the ornate Third Order church of Saint Francis. Franciscan friars reached Salvador in 1587 and built a first convent and church, which Dutch forces destroyed in the 17th century, in the course of their invasions of Bahia. The convent, the church and the Third Order church belong to the Historic Center of Salvador, a UNESCO World Heritage Site, and are counted among the Seven Wonders of Portuguese Origin worldwide.

The church is built of Bahian sandstone, including walls, pilasters and façade. It stands out among Franciscan houses of Northeast Brazil for its nave with three aisles, since most of the region's Franciscan churches have just one. The façade faces the Largo do Cruzeiro, a large rectangular square with a large stone cross, and has a pair of flanking bell towers and three portals, with a white marble statue of Francis of Assisi set in the pediment. The present church and convent were completed in 1723.

Inside, every surface, from walls and pillars to vaults and ceilings, is covered in golden sculpted woodwork and paintings. Its decoration is regarded as among the most complete and imposing of Portuguese-Brazilian Baroque gilt woodwork art, a perfect example of a golden church. The two-story cloister, built between 1707 and 1752, is lined with 37 blue-and-white azulejo panels of mythological scenes with moral allegories by the Roman poet Horace.

About this model

The Church and Convent of São Francisco (Salvador) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Salvador

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits