3D print SaskTel Centre
A free, printable model of SaskTel Centre, a wide oval arena with rooftop vent boxes and a sloped entrance, and the roads and open ground around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About SaskTel Centre
SaskTel Centre is an arena in Saskatoon, Saskatchewan, Canada. It was originally called Saskatchewan Place and was later named Credit Union Centre, and it is also known informally as Sask Place. It opened in February 1988 and replaced Saskatoon Arena, a concrete building from the 1930s. Its tenants include the Western Hockey League's Saskatoon Blades, the Canadian Elite Basketball League's Saskatoon Mamba and the National Lacrosse League's Saskatchewan Rush.
In 1985 City Council narrowly approved a site in the north industrial area by a 6–5 vote. A 1986 plebiscite on that location passed with 70% in favor, and construction went ahead. Saskatchewan Place had 8,000 seats when it was finished in 1988 and grew to 11,000 in 1990. A renovation in 2008–09 added 2,981 seats, bringing it above 15,000, and its maximum capacity is listed as 15,195.
On October 13, 1992 the arena staged the first neutral-site game in NHL history, with the Calgary Flames against the Minnesota North Stars. It has twice hosted the Memorial Cup, in 1989 and 2013, and the IIHF World Junior Championship in 1991 and 2010. It also held the 2007 Juno Awards, four Brier championships and the 2021 Canadian Olympic Curling Trials.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 8 mm | 1:3,750 |
| 200 mm | 10 mm | 1:3,000 |
| 256 mm | 13 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Wide flat roof with vent boxes
- A broad oval roof carries small boxy vents. Printing slowly keeps the long flat top even, and Print friendly adapts the small boxes to the print scale.
- Lettering on the entrance
- Raised lettering sits on a sloped entrance canopy. A larger print size or Full detail keeps the letters readable, and layers of 0.12–0.16 mm keep their edges crisp.
- One piece with the ground
- SaskTel Centre is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. SaskTel Centre takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
SaskTel Centre is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a SaskTel Centre STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. SaskTel Centre grows with the print: about 8 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
