3D print St James' Park
A free, printable model of St James' Park and the green park, streets and buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About St James' Park
St James' Park, in Newcastle upon Tyne, England, is a football stadium and the home of Newcastle United. Its seating capacity is 52,719. The site began as sloping grazing land beside Georgian Leazes Terrace, close to the Town Moor, and the city's nearby gallows, last used in 1844, gave the Gallowgate End its name. Football has been played there since 1880, and Newcastle United has called it home since 1892.
Growth at the ground has often caused friction. Wanting to expand brought conflict with local residents and the council, producing at least two proposed moves in the late 1960s, plus a controversial 1995 plan to relocate to Leazes Park nearby. Reluctance to leave is credited with the stadium's distinctive lop-sided look, created by its asymmetrical stands.
In 1905, capacity doubled to 60,000, and a main stand on Barrack Road (now the Milburn Stand) helped make the ground a state-of-the-art facility that even had a swimming pool. The Leazes End was rebuilt and reopened in 1993 as the Sir John Hall stand, Newcastle's first season in the Premiership. A 1998 expansion put a new upper tier above the Milburn Stand and the Leazes End; it was finished in July 2000, and the cost was £42 million.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 17 mm | 1:3,750 |
| 200 mm | 22 mm | 1:3,000 |
| 256 mm | 28 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Open roof framework
- The stands are topped by a skeleton of thin trusses and angled braces. Print friendly adapts them to the print scale; Full detail keeps every member on a larger print, ideally with 0.12–0.16 mm layers.
- Slim columns on the tall stands
- Rows of thin vertical columns line the outer walls of the taller stands. A larger print size keeps them sturdier, and printing slowly helps them come out cleanly.
- One piece with the ground
- St James' Park is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St James' Park takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
St James' Park is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a St James' Park STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. St James' Park grows with the print: about 17 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
