3D print Channel Islands National Park
Channel Islands National Park on one print: a 136 by 89 km relief of the park and the land around it, with lakes, rivers and land cover in their own colors.
- Region
- California
- Established
- 1980
- Area
- About 1,200 km²(450 sq mi)
- Highest point
- El Montañon, 551 m(1,808 ft)
- IUCN category
- V, Protected Landscape/Seascape
Seen from above
136 by 89 km, on a 160 mm print
- Taller than life
- The print opens with the Elevation multiplier at 8x so the terrain reads at this size. Set it to 1 for true scale.
- The footprint
- The print covers the rectangle around the park's mapped outline, so some land just outside the boundary is included. Move or resize it in the generator.
Common questions
Is the Channel Islands National Park 3D print free?
Yes. The generator runs in your browser and exports a 3MF file you can open in any common slicer. There is no account or payment.
Does the print cover the whole park?
Yes. It opens on a 136 by 89 km rectangle around the park's outline from OpenStreetMap, so the whole park fits, with some land around it.
Is the park printed at its true height?
It starts at 8 times its true height, about 4.3 mm of relief on a 160 mm print, because true scale looks flat at this size. Set the Elevation multiplier to 1 for true scale.
Can I get an STL instead of a 3MF?
The generator exports 3MF, which keeps each color as its own part. Any slicer can open it and save an STL if you need one.
Sources: Wikidata: Channel Islands National Park, OpenStreetMap: Channel Islands National Park outline, Wikipedia: Channel Islands National Park, Official website, Mapterhorn elevation data
Nearby
