3D print Etosha National Park
Etosha National Park on one print: a 295 by 110 km relief cut to the park's own border, on a plate that carries its name and facts, with lakes, rivers and land cover in their own colors.
- Regions
- Omusati Region, Oshana Region, Oshikoto Region
- Established
- 1907
- Area
- About 23,000 km²(8,900 sq mi)
- IUCN category
- II, National Park
Seen from above
295 by 110 km, on a 160 mm print
- Taller than life
- The print opens with the Elevation multiplier at 8x so the terrain reads at this size. Set it to 1 for true scale.
- The footprint
- The print follows the park's mapped border from OpenStreetMap, standing on a plate with the park's name and facts along the edges. In the generator you can resize it, change the plate text, or switch to a plain rectangle.
- A big area
- A park this large takes a few minutes to build in the browser, and small features soften at this scale. Zoom into one valley for more detail.
Common questions
Is the Etosha National Park 3D print free?
Yes. The generator runs in your browser and exports a 3MF file you can open in any common slicer. There is no account or payment.
Does the print cover the whole park?
Yes. It opens as the park's own border from OpenStreetMap, 295 by 110 km across, standing on a plate with its name and facts. Switch to a rectangle in the generator to include the land around it.
Is the park printed at its true height?
It starts at 8 times its true height, but the land is so flat that the relief is still only about 1.4 mm on a 160 mm print. The print is mostly the park's shape, its water and its land colors.
Can I get an STL instead of a 3MF?
The generator exports 3MF, which keeps each color as its own part. Any slicer can open it and save an STL if you need one.
Sources: Wikidata: Etosha National Park, OpenStreetMap: Etosha National Park outline, Wikipedia: Etosha National Park, Official website, Mapterhorn elevation data
Nearby
