3D print Jiuzhaigou Valley
Jiuzhaigou Valley on one print: a 27 by 47 km relief cut to the park's own border, on a plate that carries its name and facts, with lakes, rivers and land cover in their own colors.
- Region
- Sichuan
- Established
- 1978
- Area
- About 720 km²(280 sq mi)
- IUCN category
- V, Protected Landscape/Seascape
- Listed as
- UNESCO World Heritage Site
Seen from above
27 by 47 km, on a 160 mm print
- Taller than life
- The print opens with the Elevation multiplier at 1.5x so the terrain reads at this size. Set it to 1 for true scale.
- The footprint
- The print follows the park's mapped border from OpenStreetMap, standing on a plate with the park's name and facts along the edges. In the generator you can resize it, change the plate text, or switch to a plain rectangle.
Common questions
Is the Jiuzhaigou Valley 3D print free?
Yes. The generator runs in your browser and exports a 3MF file you can open in any common slicer. There is no account or payment.
Does the print cover the whole park?
Yes. It opens as the park's own border from OpenStreetMap, 27 by 47 km across, standing on a plate with its name and facts. Switch to a rectangle in the generator to include the land around it.
Is the park printed at its true height?
It starts at 1.5 times its true height, about 14 mm of relief on a 160 mm print, because true scale looks flat at this size. Set the Elevation multiplier to 1 for true scale.
Can I get an STL instead of a 3MF?
The generator exports 3MF, which keeps each color as its own part. Any slicer can open it and save an STL if you need one.
Sources: Wikidata: Jiuzhaigou Valley, OpenStreetMap: Jiuzhaigou Valley outline, Wikipedia: Jiuzhaigou Valley, Official website, Mapterhorn elevation data
Nearby
