3D print Katmai National Park and Preserve
Katmai National Park and Preserve on one print: a 194 by 140 km relief cut to the park's own border, on a plate that carries its name and facts, with lakes, rivers and land cover in their own colors.
- Region
- Alaska
- Established
- 1980
- Area
- About 15,000 km²(5,700 sq mi)
- Highest point
- Mount Griggs, 2,334 m(7,657 ft)
- IUCN category
- V, Protected Landscape/Seascape
Seen from above
194 by 140 km, on a 160 mm print
- Taller than life
- The print opens with the Elevation multiplier at 8x so the terrain reads at this size. Set it to 1 for true scale.
- The footprint
- The print follows the park's mapped border from OpenStreetMap (its main part), standing on a plate with the park's name and facts along the edges. In the generator you can resize it, change the plate text, or switch to a plain rectangle.
- A big area
- A park this large takes a few minutes to build in the browser, and small features soften at this scale. Zoom into one valley for more detail.
Common questions
Is the Katmai National Park and Preserve 3D print free?
Yes. The generator runs in your browser and exports a 3MF file you can open in any common slicer. There is no account or payment.
Does the print cover the whole park?
Yes. It opens as the park's own border from OpenStreetMap, 194 by 140 km across, standing on a plate with its name and facts. Switch to a rectangle in the generator to include the land around it.
Is the park printed at its true height?
It starts at 8 times its true height, about 12 mm of relief on a 160 mm print, because true scale looks flat at this size. Set the Elevation multiplier to 1 for true scale.
Can I get an STL instead of a 3MF?
The generator exports 3MF, which keeps each color as its own part. Any slicer can open it and save an STL if you need one.
Sources: Wikidata: Katmai National Park and Preserve, OpenStreetMap: Katmai National Park and Preserve outline, Wikipedia: Katmai National Park and Preserve, Official website, Mapterhorn elevation data
Nearby
