Oval

3D print Daytona International Speedway

Daytona International Speedway on one print: a 1.4 by 1.6 km map of the 2.500 mi oval, with the track in its own color and the buildings, roads and terrain around it.

Print this track Free, in your browser. Exports a slicer-ready 3MF.
Render of a 3D printed map of Daytona International Speedway, the track in cyan on a dark grey model of the land and buildings around it.
Studio render of a 160 mm print of Daytona International Speedway in dark grey with a cyan track, from the 3MF this page's link exports. Pick your own colors in the generator.
Location
Daytona Beach, Florida, United States
Type
Oval
Opened
1959
Lap length
2.500 mi (4.023 km)
Turns
4
Racing here
NASCAR Cup Series, IMSA WeatherTech SportsCar Championship, NASCAR O'Reilly Auto Parts Series, NASCAR Craftsman Truck Series
Map of the Daytona International Speedway track as it prints, north at the top
2.500 mi lap · 4 turns Drawn from the OpenStreetMap lines the print uses

On the print

1.4 by 1.6 km, on a 160 mm print

The track in its own color
The racing surface is its own part in the 3MF with its own color, so the lap stands out from the roads around it. Change the color, or print the whole map in one filament.
The footprint
The print opens in City mode on a 1.4 by 1.6 km rectangle around the mapped track, with a margin on every side. Move or resize it in the generator to take in more of the area.

Common questions

Is the Daytona International Speedway 3D print free?

Yes. The generator runs in your browser and exports a 3MF file you can open in any common slicer. There is no account or payment.

Does the print show the whole track?

Yes. It opens on a 1.4 by 1.6 km rectangle around the track as OpenStreetMap maps it, so the 2.500 mi oval fits with some of the land around it.

Are the buildings around the track included?

Yes. Grandstands, pit buildings and everything else mapped nearby print with the rest of the map, at their mapped heights where those are known.

Can I get an STL instead of a 3MF?

The generator exports 3MF, which keeps each color as its own part. Any slicer can open it and save an STL if you need one.

Sources: Wikipedia: Daytona International Speedway, Wikidata: Daytona International Speedway, OpenStreetMap: Daytona International Speedway, Official website

Nearby

More tracks near Daytona International Speedway

All 169 tracks