Street circuit

3D print Madring

Madring on one print: a 1.6 by 2.3 km map of the 5.414 km street circuit, with the track in its own color and the buildings, roads and terrain around it.

Print this track Free, in your browser. Exports a slicer-ready 3MF.
Render of a 3D printed map of Madring, the track in cyan on a dark grey model of the land and buildings around it.
Studio render of a 160 mm print of Madring in dark grey with a cyan track, from the 3MF this page's link exports. Pick your own colors in the generator.
Location
Barajas, Madrid, Spain
Type
Street circuit
Opened
2026
Lap length
5.414 km (3.364 mi)
Turns
22
Racing here
Formula One, Formula 2, Formula 3
Map of the Madring track as it prints, north at the top
5.414 km lap · 22 turns Drawn from the OpenStreetMap lines the print uses

On the print

1.6 by 2.3 km, on a 160 mm print

The track in its own color
The racing surface is its own part in the 3MF with its own color, so the lap stands out from the roads around it. Change the color, or print the whole map in one filament.
The footprint
The print opens in City mode on a 1.6 by 2.3 km rectangle around the mapped track, with a margin on every side. Move or resize it in the generator to take in more of the area.
Public streets
Part of this lap runs on public streets. Where OpenStreetMap maps them as part of the circuit, they print in the track color; elsewhere they print as ordinary roads.

Common questions

Is the Madring 3D print free?

Yes. The generator runs in your browser and exports a 3MF file you can open in any common slicer. There is no account or payment.

Does the print show the whole track?

Yes. It opens on a 1.6 by 2.3 km rectangle around the track as OpenStreetMap maps it, so the 5.414 km street circuit fits with some of the land around it.

Are the buildings around the track included?

Yes. Grandstands, pit buildings and everything else mapped nearby print with the rest of the map, at their mapped heights where those are known.

Can I get an STL instead of a 3MF?

The generator exports 3MF, which keeps each color as its own part. Any slicer can open it and save an STL if you need one.

Sources: Wikipedia: Madring, Wikidata: Madring, OpenStreetMap: Madring, Official website

Nearby

More tracks near Madring

All 169 tracks