3D print Abbasiyyin Stadium
A free, printable model of Abbasiyyin Stadium, its seating bowl and floodlight masts, and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Abbasiyyin Stadium in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
13 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slim floodlight masts
The stadium bowl is low and wide, but tall floodlight masts rise around it. Use a slow print speed with cooling for the masts, and keep Landmark detail on Print friendly unless you print large.
- Stepped seating rows
The terraces are modeled as many fine rows. A layer height of 0.12–0.16 mm keeps the stepped seating crisp, and a larger print size keeps more of the rows.
- One piece with the ground
Abbasiyyin Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Abbasiyyin Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Abbasiyyin Stadium
Abbasiyyin Stadium is an all-seater, multi-use venue in Damascus, Syria. It opened in 1957 with room for 10,000 spectators and was built for football matches and local athletics events. Most of its history has been tied to football, and in the past the Syrian national team used it as its home ground.
The stadium was renovated in 1976 for the 5th Pan Arab Games, when its capacity grew to 40,000. It then served as a main venue again for the 7th Pan Arab Games in 1992. On May 6, 2001, Pope John Paul II celebrated Mass there. A renovation in 2011 turned it into an all-seater ground and cut the capacity to 30,000 seats. It was the 4th largest stadium in Syria.
About this model
Abbasiyyin Stadium is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
