3D print Den Dreef
A free, printable model of Den Dreef and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Den Dreef in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine cantilever roof
The roof is a long shallow cantilever with a fine front edge. Print friendly detail adapts the thinnest overhang; Full detail suits a large print or a fine nozzle.
- Open raked stands
Two seating banks face the pitch under an open roof, divided by seven stair aisles. Slow the print and add cooling so the thin roof edge and aisle dividers stay sharp.
- One piece with the ground
Den Dreef is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Den Dreef takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Den Dreef
Den Dreef, known for sponsorship reasons as King Power at Den Dreef, is a football ground on Kardinaal Mercierlaan, in Heverlee, a suburb of Leuven, Belgium. Oud-Heverlee Leuven, a Jupiler Pro League side, plays its home games there, and the ground also hosts matches for the Belgium women's national team and the national under-21 team.
The ground was known as Leuvens Sportcentrum until Oud-Heverlee Leuven was established in 2002, when it took the name Den Dreef. At that point it was laid out for track and field, with tartan lanes running around the pitch. One main stand ran about two-thirds of the pitch, with a smaller covered standing terrace on the opposite side.
The curves were later demolished and replaced by covered single-tier stands behind both goals. The main stand was extended in 2011 and 2012, lifting capacity to 8,519 and then 9,493. The opposite stand was demolished in December 2015, and a new stand opened for the 2016-17 season, raising capacity to 10,020.
About this model
Den Dreef is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
