3D print St Mary's Stadium
A free, printable model of St Mary's Stadium, a bowl of four equal stands with a crown of truss peaks behind the roof, and the surrounding city, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- The crown of trusses
Pyramid frames rise along the back edge of the roof, with lower ones over the main stand. Print friendly adapts these peaks at small scales; a larger print keeps the separate tips clear.
- A closed, even bowl
All four stands reach the same height and the corners are filled, so the model has a continuous rim. Layers of 0.12 to 0.16 mm keep the roof edge and the end-roof grids crisp.
- One piece with the ground
St Mary's Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St Mary's Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St Mary's Stadium
Southampton, in Hampshire, England, is home to St Mary's Stadium, a football ground with seats in every stand. Since 2001 it has been the home venue of Southampton, after the club moved from The Dell, and with a capacity of 32,384 it is the biggest football stadium in South East England.
Southampton had first tried to build a new ground at Stoneham, outside the city, and when that failed the city council offered a disused gas works site in the heart of Southampton, about one and a half miles from The Dell. Construction began in December 1999 and finished at the end of July 2001, at a cost of £32 million for the 32,689-seat stadium and improvements to local infrastructure. The first match, on August 1, 2001, was against Espanyol, and the Spanish club won 4–3.
The ground is a complete bowl with all four stands at the same height. The stands are named after parts of the city: the main Itchen Stand on the east side faces the River Itchen, the Kingsland Stand sits opposite, the Chapel Stand is behind the south goal and the Northam Stand behind the north goal. Translucent panels at the back of three stands, and a large translucent section of the Chapel roof, let daylight reach the pitch.
About this model
St Mary's Stadium is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
