3D print Accra Sports Stadium
A free, printable model of Accra Sports Stadium, with its oval bowl and slim floodlight masts, and the grounds, roads and low buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Accra Sports Stadium
Accra Sports Stadium is a multi-use, all-seater stadium in Accra, Ghana, with a capacity of 40,000. It is mostly used for association football and also hosts rugby union. A football match between Accra XI and Kumasi XI inaugurated it in 1962. Hearts of Oak, described as among Africa's most popular clubs, plays there, as do Accra Lions FC and Great Olympics, and Ghana's national team sometimes plays there too. The stadium also carried the name Ohene Djan Stadium, given in 2004 after renovations, after Ghana's first Director of Sports.
As a designated host of some games at the 2008 African Cup of Nations, the stadium was rebuilt, upgraded and brought up to FIFA standards. Work finished in October 2007, and a four-nation tournament, the Zenith Cup, which Ghana won, inaugurated the renewed stadium. At the 2000 African Cup of Nations, hosted by Ghana and Nigeria, it staged nine matches, and it also staged the 1978 final. On November 6, 1976, Ghanaian David Kotei lost his World Boxing Council featherweight title to Danny Lopez by unanimous decision after 15 rounds, before a crowd estimated at over 100,000.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 14 mm | 1:3,750 |
| 200 mm | 18 mm | 1:3,000 |
| 256 mm | 22 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Slim floodlight masts
- Several thin floodlight masts rise above the bowl. Print friendly adapts them to the print scale, Full detail keeps them for a larger print, and slow printing with good cooling helps.
- Slender frame under the stands
- The outer wall is a frame of slender columns and beams, and the flat roof of the main stand rests on thin posts. A larger print size and layers of 0.12–0.16 mm keep them crisp.
- One piece with the ground
- Accra Sports Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Accra Sports Stadium takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Accra Sports Stadium is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Accra Sports Stadium STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Accra Sports Stadium grows with the print: about 14 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
