A white 3D print of Äcem Mosque, a hip-roofed mosque building with a very tall slender minaret beside it, standing among low buildings and wide streets.

3D print Äcem Mosque

A free, printable model of Äcem Mosque, with its tall slender minaret, and the low buildings and wide streets around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Äcem Mosque model, North view North
  • Äcem Mosque model, East view East
  • Äcem Mosque model, South view South
  • Äcem Mosque model, West view West

© OpenStreetMap contributors

The model you print

Äcem Mosque in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
51 m
On a 160 mm print
14 mm
Scale
1:3,750

51 m of Äcem Mosque, 14 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. A very slender minaret

    The tall, thin minaret, with its balcony and fine spire, is the most delicate part. Choose Full detail on a large print, or Print friendly on a small one, and print slowly with good cooling.

  2. Arched windows on the walls

    The side walls carry rows of arched windows and round details. Layers of 0.12-0.16 mm keep them crisp, and a bigger print size keeps them from blurring.

  3. One piece with the ground

    Äcem Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Äcem Mosque takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Äcem Mosque

Kazan, in Tatarstan, Russia, is home to Äcem Mosque (Äcem mäçete in Tatar), a prominent cathedral mosque. It lies in the Old Tatar Quarter's southern part, a historic district where Tatars live, and is among roughly a dozen historical mosques there.

A wealthy Tatar merchant, Mortaza Äcimev, sponsored the construction, and the mosque takes its name from him. Building took place from 1887 to 1890. The architect is unknown, and the architectural style is described as national romance eclecticism. The one-storied building has two halls and a 51-meter minaret near the door, and its interior follows medieval Oriental traditions. The authorities closed the mosque in 1930. Both facades and the interior were reconstructed from 1990 to 1992, and in 1992 the building was returned to the believers.

About this model

Äcem Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Kazan

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits