3D print Alþingishúsið
A free, printable model of Alþingishúsið, a two-story building with a hipped roof and a rounded bay, set among lawns, paths and nearby buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Alþingishúsið in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rows of arched windows
Two rows of arched windows with shallow frames run along each side. Full detail keeps all of them, which works best on a larger print with a 0.12 mm layer height; Print friendly simplifies them for small prints.
- Thin pole on the roof
A slender pole rises above the roof, next to a small decorative top. Print friendly adapts thin parts like this to the print scale, and printing slowly helps if you keep it in Full detail.
- One piece with the ground
Alþingishúsið is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Alþingishúsið takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Alþingishúsið
Alþingishúsið, which means "the Parliament House", is a classical building of the 19th century that stands beside Austurvöllur in central Reykjavík, Iceland. It is the home of Alþingi, the Icelandic parliament. Ferdinand Meldahl designed it, and the builders used hewn Icelandic dolerite, working from 1880 to 1881.
Above the four outermost windows of the first floor, the tympanums carry reliefs of Iceland's four landvættir, namely a bull, a giant, a vulture and a dragon. The building has had other occupants over the years. Among them were the Icelandic National Gallery and, earlier, the national library together with its Antiquaries Collection. From 1911 to 1940 the University of Iceland occupied the first floor, and the President of Iceland kept offices here until 1973.
About this model
Alþingishúsið is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline


