3D print America First Field
A free, printable model of the stadium's wavy roof canopy and seating bowl, with the curving roads, open ground and streams around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About America First Field
America First Field, a stadium built for soccer, stands in Sandy, Utah. It was known as Rio Tinto Stadium, nicknamed The RioT, until America First Credit Union took over the naming rights, and in 2022 the stadium became America First Field. Real Salt Lake, a Major League Soccer club, and the Utah Royals, a National Women's Soccer League club, play there. It opened on October 9, 2008. Soccer seating is 20,213, and the stadium can hold over 25,000 for concerts.
Real Salt Lake had been using Rice-Eccles Stadium at the University of Utah. After months of discussions with local, county and state officials, the team announced it would build its own stadium, first called Real Salt Lake Stadium and ultimately named Rio Tinto Stadium. Sandy, in the suburbs of Salt Lake City, was the site chosen for the $110 million project, and Rossetti's California office designed it. The New York Red Bulls were the opening opponent, hosted by Real Salt Lake.
Matches of note held there include the 2009 MLS All-Star Game and the Lamar Hunt US Open Cup final in 2013. The CONCACAF Champions League Finals of 2011 had their second leg here. The stadium was also a host for the 2013 Gold Cup and for the final stages of the men's Olympic qualifying tournament that CONCACAF ran in 2015.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 12 mm | 1:3,750 |
| 200 mm | 15 mm | 1:3,000 |
| 256 mm | 19 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Fins under the wavy roof
- A wavy roof canopy hangs over the seating on thin fin-like struts. Print friendly adapts these slim parts to your print scale; Full detail keeps them, better for larger prints.
- Diagonal end roofs and tall masts
- The two ends carry roofs with diagonal bands, and slim masts rise near the corners. Print slowly with good cooling, and use layers of 0.12 to 0.16 mm to keep the thin parts crisp.
- One piece with the ground
- America First Field is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. America First Field takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
America First Field is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an America First Field STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. America First Field grows with the print: about 12 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
