3D print Anoeta Stadium
A free, printable model of Anoeta Stadium, its oval roof with angled trusses and the green hillside, roads and buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Anoeta Stadium
In San Sebastián, in Spain's Basque Country, stands Anoeta Stadium, a football ground inaugurated in 1993. The stadium sits inside the Anoeta Sports Complex. Football matches are its main use, chiefly home games of Real Sociedad. Real Sociedad has used three home grounds, and Anoeta is the third. To mark the opening in 1993, Real Sociedad and Real Madrid drew 2–2 in a friendly, with Loren scoring the first goal.
The original capacity was 32,000, and construction was said to cost 3 billion pesetas, about €21 million at the time. Fans disliked the original layout, in which an athletics track kept the stands far from the field. The reconstruction began in May 2017. In its first phase it removed the track, added lower seating rows along the side stands and built a completely new south end stand, with further work on a new north end stand.
Inside, the atmosphere changed after the rebuild, and the Aitor Zabaleta singing section became its main focal point. In the Sports category, the rebuilt stadium was given the World Prix Versailles award for 2020. Anoeta hosted the final when the later stages of the UEFA Women's Champions League for 2019–20 were played in the Basque Country. The rugby union clubs Biarritz Olympique and Aviron Bayonnais have also taken home matches there from the 2009–10 Top 14 season onward; Anoeta is the nearest large stadium to their towns.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 13 mm | 1:3,750 |
| 200 mm | 16 mm | 1:3,000 |
| 256 mm | 20 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Angled roof trusses
- A lattice of angled trusses spans over the stands. Print friendly adapts these thin members to the print scale; Full detail keeps every one, which suits a larger print or a fine nozzle.
- Jagged roof edge
- Many small points run around the roof rim. A bigger print size keeps them, and printing slowly with good cooling helps the tips form cleanly. Layers of 0.12 to 0.16 mm keep them crisp.
- One piece with the ground
- Anoeta Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Anoeta Stadium takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Anoeta Stadium is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Anoeta Stadium STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Anoeta Stadium grows with the print: about 13 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
