3D print Estadio La Cartuja
A free, printable model of Estadio La Cartuja, with its ring of angled roof panels and the roads and open ground around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Estadio La Cartuja
Estadio La Cartuja is a stadium on Seville's Isla de La Cartuja, in Spain. Its earlier name was Estadio Olímpico de Sevilla, and its full official name is Estadio La Cartuja de Sevilla, which is commonly shortened to simply La Cartuja. It was finished in 1999 for the Athletics World Championships. Cruz y Ortiz is listed as its architect, and the venue is mostly used for football.
Seville put the stadium forward in its bids for the Summer Olympics of 2004 and 2008. The 2003 UEFA Cup final, played between Celtic and Porto, took place here. The Royal Spanish Tennis Federation picked it for the Davis Cup final in both 2004 and 2011, and each time a temporary roof was fitted over the side of the stadium with the clay court.
Its capacity is 71,374 seats, and it is the largest stadium in Andalusia. It has previously held a Copa del Rey final, and UEFA Euro 2020 used it as one of its host venues, in place of San Mamés Stadium in Bilbao. Concerts there have included Madonna's Sticky & Sweet Tour in 2008, U2's U2 360° Tour in 2010 and AC/DC's Rock or Bust World Tour in 2016.
How it prints
Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 11 mm | 1:4,063 |
| 200 mm | 14 mm | 1:3,250 |
| 256 mm | 18 mm | 1:2,539 |
-
North
-
East
-
South
-
West
- Ring of angled roof panels
- A ring of sharp, angled roof panels rises above the seating bowl. Print friendly adapts these thin points to the print scale; Full detail keeps every panel, which suits a larger print or a fine nozzle.
- Stepped seating bowl
- The oval bowl is cut into many shallow steps. A bigger print size keeps more of them, and layers of 0.12 to 0.16 mm keep the steps crisp.
- One piece with the ground
- Estadio La Cartuja is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Estadio La Cartuja takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Estadio La Cartuja is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Estadio La Cartuja STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Estadio La Cartuja grows with the print: about 11 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
