A white 3D print of Antwerpen-Centraal railway station, a building with a long arched hall and a central dome, surrounded by dense city blocks.

Antwerpen-Centraal railway station in 3D

The Antwerpen-Centraal railway station appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Antwerpen-Centraal railway station model, North view North
  • Antwerpen-Centraal railway station model, East view East
  • Antwerpen-Centraal railway station model, South view South
  • Antwerpen-Centraal railway station model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Antwerpen-Centraal railway station may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
20 mm
Scale
1:3,750

20 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Ribbed barrel roof

    The long train hall roof is modeled as many fine ribs. Print friendly adapts them to the print scale; Full detail keeps every rib on a larger print. A 0.12-0.16 mm layer height helps.

  2. Dome and small towers

    The central dome has a lantern on top and is flanked by small domed turrets. Print slowly with good cooling near these thin tips, or choose Print friendly for small prints.

  3. One piece with the ground

    The Antwerpen-Centraal railway station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Antwerpen-Centraal railway station takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Antwerpen-Centraal railway station

Antwerpen-Centraal serves as the main railway station of Antwerp, Belgium. It is an important hub, and it is one of just four Belgian stations connected to the high-speed lines. Until early 2007, trains ended their journeys here; the station had been a terminus since 1873. Antwerp's first station, at the end of the Brussels-Mechelen-Antwerp line that opened on June 3, 1836, was a wooden building. Architect Louis Delacenserie designed the stone-clad building that replaced it, which went up between 1895 and 1905.

It is widely regarded as Belgium's finest railway architecture, though Delacenserie drew on such a wide range of influences that his design is hard to assign to one style. The huge dome over the waiting room hall earned the building the nickname spoorwegkathedraal, or "railroad cathedral." The train hall, originally iron and glass, is 185 meters long and covers 12,000 square meters; the engineer Clément Van Bogaert designed it. The height of the station was needed to disperse the smoke of steam locomotives.

North of the station lies a large public square, created as an entry to the city and renamed Koningin Astridplein in 1935. A viaduct leading into the station was designed by the local architect Jan Van Asperen. Reconstruction that began in 1998 turned the terminus into a through station: a tunnel with platforms on two underground levels passes beneath it, so that high-speed trains no longer need to reverse. In total it has 14 tracks across four levels, and it won a Grand Prix at the Europa Nostra Awards in 2011.

About this model

The Antwerpen-Centraal railway station is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Antwerp

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits