AT&T Building (Batman) in 3D
The AT&T Building (Batman) appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of AT&T Building (Batman) may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- Real height
- 188 m
- On a 160 mm print
- 52 mm
- Scale
- 1:3,750
188 m of the AT&T Building (Batman), 52 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Twin spires on top
Two pointed spires and an arched opening crown the tower. Print slowly with good cooling for the spire tips; Print friendly adapts them to the print scale, while Full detail keeps them sharp on large prints.
- Tall, slim tower
The tower is much taller than its base and neighbors, with fine vertical facade lines. Layers of 0.12 to 0.16 mm keep those lines crisp up the full height.
- One piece with the ground
The AT&T Building (Batman) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The AT&T Building (Batman) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the AT&T Building (Batman)
The AT&T Building is a former name of 333 Commerce Street, a 33-story skyscraper in Nashville, Tennessee, which was also called the South Central Bell Building and the BellSouth Building and is informally known as the Batman Building. It stands 617 feet (188 m) tall and was completed in September 1994 as an office tower built to hold 2,000 workers.
The tower occupies a site of 2.7 acres (11,000 m2) on Commerce Street between 3rd and 4th Avenues North, covering 1+2⁄3 city blocks. Its foyer is a three-story winter garden atrium, and beneath it lies a nine-story parking garage for 1,300 vehicles. The architects were Earl Swensson Associates, whose president said the client wanted a signature piece of architecture.
Its dark color and pair of spires gave it the Batman nickname, from a resemblance to the superhero's cowl. In 2009 a French business journal named it one of the world's 12 most original office buildings. The phone company that became AT&T has run its Tennessee headquarters from the building since it opened in 1994, and television station WTVF keeps remote cameras on the western spire.
About this model
The AT&T Building (Batman) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline



