A white 3D print of the Auberge de Castille, a rectangular building with bands of carved windows, a stepped entrance with a coat of arms above it and an open square courtyard, among taller blocks and streets.

3D print the Auberge de Castille

A free, printable model of the Auberge de Castille in Valletta, a rectangular building with an open courtyard, a stepped entrance and carved windows, among taller blocks and streets.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Auberge de Castille model, North view North
  • Auberge de Castille model, East view East
  • Auberge de Castille model, South view South
  • Auberge de Castille model, West view West

© OpenStreetMap contributors

The model you print

Auberge de Castille in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
9 mm
Scale
1:3,750

9 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Open courtyard in the roof

    The central courtyard shows as a square opening in the flat roof. Larger prints keep its edges sharp, and a layer height of 0.12-0.16 mm helps the walls around it stay crisp.

  2. Entrance steps and coat of arms

    The steps, columns and the carved coat of arms above the door are small relief details. The Print friendly Landmark detail setting adapts them to the print scale; Full detail suits larger prints.

  3. One piece with the ground

    The Auberge de Castille is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Auberge de Castille takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Auberge de Castille

In Valletta, Malta, at Castile Place, stands the Auberge de Castille, historically called the Auberge de Castille et Portugal. It occupies Valletta's highest point, with views over Floriana and the Grand Harbour area. The Baroque building dates from the 1740s, under Grand Master Manuel Pinto da Fonseca, who came from Portugal. It replaced a 1574 building made to lodge Order of Saint John knights belonging to the Castile, León and Portugal langue.

Architect Girolamo Cassar designed the first auberge, built in 1573-74 in the Mannerist style; it was regarded as his most innovative design. It rose a single storey, with a façade split into 11 bays by panelled pilasters. Between 1741 and 1744 it was taken down and rebuilt in full, in the Spanish Baroque style, to designs by Andrea Belli, with Domenico Cachia supervising. The main door was enlarged in 1791.

The building has two stories and a rectangular plan around a central courtyard. Eleven bays divide the façade, with a continuous cornice and rusticated corners. A bronze bust of Pinto and a trophy of arms rest on columns flanking the doorway at the top of a flight of steps. The Prime Minister's office relocated here in 1972, from the Auberge d'Aragon, and Castille serves as a stand-in word for the Prime Minister and the office.

About this model

The Auberge de Castille is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Valletta

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits