Parliament House (Malta) in 3D
The Parliament House (Malta) appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Parliament House (Malta) may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Perforated facades
The facades are covered in small rectangular openings that become tiny at print scale. Print friendly adapts them; Full detail keeps every opening and suits a larger print with a 0.12–0.16 mm layer height.
- Raised blocks on thin columns
Both blocks stand on slender columns beneath wide overhanging roofs. Print slowly and use a bigger print size to keep these thin supports sound.
- One piece with the ground
The Parliament House (Malta) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Parliament House (Malta) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Parliament House (Malta)
Parliament House, called Dar il-Parlament in Maltese, is where the Parliament of Malta meets. It stands on Republic Street close to City Gate, which marks the way into Valletta. Renzo Piano designed it, and it went up between 2011 and 2015 under the City Gate Project. The same scheme produced a new City Gate and gave the Royal Opera House's ruins a new life as an outdoor performance space. The building stands beside Saint James Cavalier and the opera house ruins.
Once the steel frame was finished in early 2012, the building was covered in limestone quarried in Gozo and cut to shape in Italy before returning to Malta. The cladding was meant to suggest honeycombs: Malta takes its name from Melite, meaning honey. The modern design drew heavy criticism, and the cost, put at around €90 million, was also contested. The public likened the cladding to a dovecote or a cheese grater.
President Marie Louise Coleiro Preca inaugurated Parliament House on May 4, 2015, calling it a milestone for the nation's parliament. It was the country's first parliament building made for the purpose. Before that, from 1921 to 1976 the Parliament met in a chamber of the Grandmaster's Palace, and then in the palace's former armoury. Visitors cannot enter most of the building, though a permanent ground-floor exhibition welcomes the public.
About this model
The Parliament House (Malta) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline




