3D print Bath Spa railway station
A free, printable model of Bath Spa railway station and the river bend, green banks and city buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Bath Spa railway station in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Curving gables on the roofline
The curving gables along the roof are the smallest shapes on the model. A larger print size keeps them distinct; Print friendly adapts them to the print scale, while Full detail keeps every modeled feature.
- Long, narrow building
The station is a long, low strip beside the river. A 0.12–0.16 mm layer height in the slicer keeps its repeated windows and columns crisp along the whole front.
- One piece with the ground
Bath Spa railway station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Bath Spa railway station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Bath Spa railway station
Bath Spa railway station is the main station for Bath, a city in Somerset, England. It lies on the Great Western Main Line, 172.0 km (106.89 mi) from London Paddington, with Oldfield Park to its west and Chippenham to its east. The Great Western Railway had Isambard Kingdom Brunel build it, and it opened on August 31, 1840, under the name Bath. It became Bath Spa in 1949 to tell it apart from Bath Green Park station.
The station is a Grade II* listed building, and its asymmetrical Tudor design has curving gables. The line swings over from the Avon's southern bank to reach the station on the north bank, then swings back again. The adjacent Royal Station Hotel opened five years after the station, planned as a luxurious hotel, and Queen Victoria was among its guests.
The platforms are spaced widely because two broad-gauge carriage sidings were laid between the platform lines when it was built. A hammerbeam roof once covered the area between the platforms, but it was taken down in 1897, during a remodeling that lengthened the platforms. A footbridge at the rear crosses the Avon to the Widcombe area. The first bridge, of wood and tolled, opened in 1862 and collapsed in 1877; a steel girder bridge replaced it later that year.
About this model
Bath Spa railway station is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





