3D print the Berlin TV Tower
A free, printable model of the Berlin TV Tower among buildings, streets, and park paths, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 368 m
- On a 160 mm print
- 99 mm
- Scale
- 1:3,750
368 m of the Berlin TV Tower, 99 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Protect the slender antenna
The antenna narrows through several steps to a fine tip. Use Print friendly to adapt these thin sections to the print scale, and print slowly with cooling for the tall mast.
- Preserve the sphere detail
The sphere has small surface facets above the smooth shaft. A larger print with Full detail keeps these modeled features; a slicer layer height of 0.12–0.16 mm helps keep the sphere's curved profile crisp.
- One piece with the ground
The Berlin TV Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Berlin TV Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Berlin TV Tower
The Berlin TV Tower stands beside Alexanderplatz in the Marien Quarter of Berlin's Mitte district. East Germany's government built it between 1965 and 1969, combining a broadcasting facility with a statement of communist power. Its height, including the antenna, is 368 meters (1,207 ft), making it Germany's tallest structure. Several architects contributed to the project, among them Hermann Henselmann and Günter Franke. The shaft is reinforced concrete, with the tower's ball assembled from separate segments above it. An entrance pavilion occupies the base.
Radio and television transmitters share the tower with visitor facilities inside its sphere. The observation platform sits about 203 meters (666 ft) above ground, while the restaurant, called Sphere, is higher at 207 meters (679 ft). The restaurant completes a rotation every 30 minutes; two elevators take visitors up to the sphere in 40 seconds. A replacement antenna installed in 1997 brought the tower to its stated height. Official monument status was granted in 1979 and retained after German reunification, when its symbolism shifted toward a reunited Berlin.
About this model
The Berlin TV Tower is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
