3D print the Olympiastadion (Berlin)
A free, printable model of the Olympiastadion, an oval ring with a columned wall, open at one end, with the parkland, roads and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 9 mm
- Scale
- 1:4,375
9 mm tall on a 160 mm print
Make this print opens the generator on a 700 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Dense columns and roof ribs
The outer wall is a close row of thin columns under a ribbed roof ring. Print friendly adapts these to your print scale, and Full detail keeps them; a larger print or a finer nozzle helps.
- Open end and slender posts
The ring is open at one end, and thin free-standing posts stand nearby. Print slowly with good cooling, and use Print friendly if a post is too thin for your nozzle.
- One piece with the ground
The Olympiastadion (Berlin) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Olympiastadion (Berlin) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Olympiastadion (Berlin)
The Olympiastadion, or Berlin Olympic Stadium in English, is a sports stadium in Olympiapark Berlin, in Berlin, Germany. Werner March originally designed it for the 1936 Summer Olympics, and during those Games its record attendance was believed to exceed 100,000. The stadium and the surrounding Reichssportfeld sports complex were commissioned by the Nazi government and built with state funds between 1934 and 1936. The lower half of the structure is recessed 12 m (40 ft) below ground level.
Renovations in 2004 gave the stadium 74,475 permanent seats, making it Germany's largest stadium for international football matches. Hertha BSC has played there since 1963. Three matches of the 1974 FIFA World Cup were played there, and a renovation prepared it for the 2006 FIFA World Cup, which brought six matches, among them the final. The annual DFB-Pokal final has been played there since 1985. It was also a host venue in the FIFA Women's World Cup of 2011, and it staged the 2015 UEFA Champions League final. UEFA Euro 2024 brought six games, including the final.
The stadium stands on the foundation of an earlier one, the Deutsches Stadion, planned for the 1916 Summer Olympics, which were canceled because of World War I. In 1931 the International Olympic Committee chose Berlin as the host of the 11th Summer Olympics. When it was finished, the Reichssportfeld covered 132 hectares (330 acres), running from the stadium in the east to the Maifeld and the Waldbühne amphitheater in the west. The stadium survived the Second World War almost untouched, with damage only from machine gun fire.
About this model
The Olympiastadion (Berlin) is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
