3D print the Borden Milk Company Creamery
A free, printable model of the Borden Milk Company Creamery, a long, low group of connected buildings, and the curving streets and low buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Long, low group of buildings
The creamery is a long cluster of low, connected buildings, so the model is small. A larger print keeps the building edges and roof steps clear.
- Ridged roof sections
Some roof sections show fine parallel ridges. Print friendly adapts them to the print scale; a layer height of 0.12–0.16 mm keeps them crisp.
- One piece with the ground
The Borden Milk Company Creamery is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Borden Milk Company Creamery takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Borden Milk Company Creamery
The historical site known as the Borden Milk Company Creamery stands in Tempe, Arizona. It began as an ice plant and was altered so that it also made pasteurized bottled milk. It was sold in 1927 as the Pacific Creamery Plant, and it ran under the Borden name until it closed in 1953.
After the 1953 closure the building stood empty. It later reopened as Four Peaks Brewery, which is both a restaurant and a regional brewery. The operation mattered enough to the city that a new park received the name "Creamery Park" in 1999.
Its Mission Revival design uses red brick almost throughout; inside are wooden ceilings and a glass clerestory that rises as high as 35 feet on a steel suspension system. The National Register of Historic Places listed the nine buildings in 1984.
About this model
The Borden Milk Company Creamery is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
